Bwo Type Tubular Stranding Machine  JG-630x12+1x1250

1.Application:
This machine is mainly used for the stranding of 12-core copper, aluminum and steel core aluminum strand wire. The appearance of the unit has been planned and designed by professionals, and the appearance is atmospheric and the high-speed operation is stable.
The actual production pitch can be obtained by independent motor drive. At the same time, this driving form can greatly reduce the mechanical transmission structure, thus reducing the maintenance link, effectively reducing the equipment running noise and the later maintenance link.

2. Main Parameter:

• Single wire diameter:Ø 1.5mm- Ø 5.0mm for Cu
• Ф1.6mm- Ø 5.0mm for Al
• Ø 1.0mm- Ø 3.5mm for St
• Through line hole diameter:Ø 25mm
• Strand pitch range:56-427mm (stepless adjustable on Touch screen)
• Cage max rotation speed:350r/min Working 
• Linear speed :128m/min max
• Capstan wheel diameter:Ø1600+ Ø1600mm
• Pay-off bobbin size in cage:PND630
• Take-up bobbin size:PN800-PN1600
• Center Pay-off bobbin size :PND630
• Bow type pay-off bobbin size:PN1250
• Main motor power:75KW
• Capstan motor power:55KW
• Take-up motor power:5.5KW

• Ø630/12 bobbins stranding cage
• Ø1250 bobbins stranding cage
• Closing wire die holder
• Front side straightener
• Mechanic and Electrical Meter counter 
• Ø1600 Double wheel capstan device
• Ø 1600 Column type take-up and traverse
• Electrical control system
• Safety protection cover

•  The unit adopts PLC for unified coordinated control operation. Touch screen man-machine interface operation is adopted. Corresponding convenient control buttons such as emergency stop and inching are set at the corresponding operating position of the unit.
• The electrical cabinet shall be designed with good mechanical performance and dust-proof performance, and shall be equipped with proper ventilation openings. The electric power cabinet and control cabinet shall be set and installed separately.
• The power supply is three wire five phase system: 380V (± 10%) 50HZ.
• Total installed power:150KW
• The unit is equipped with corresponding number of emergency stop and inching buttons at each operation position for easy operation.
•  The electric control part consists of operation cabinet, touch screen, etc., and corresponding control buttons are set in each unit
• The control cabinet shall be designed with good mechanical performance and dust-proof performance, and shall be equipped with proper ventilation openings.
•  Motor protection function: the electrical control circuit is designed with phase loss, overload and overheating protection functions to prevent motor damage.

• All Bearing brand:（HRB）
• Low voltage appliance brand:（SCHNEIDER）
• Brand of pneumatic component:（AIRTAC）
• Brand of main drive motor:（JIANGHUAI）
• Take-up motor brand:（JIANGHUAI））
• PLC:（SIEMENS）
• Touch screen:（SIEMENS ）
• Inverter:(INOVANCE)
• Bolt grade:≥8.8 class