50+35 LAN Cable Extruder Machine For CAT5/6/7 Cable

1. Application:

It used in wire insulation extrusion precedure at single layer, triple (skin-foam-skin).

2.Main parameter

• cable extrusion Machine for cat5/6/7/8 production
• Extrusion material: HDPE,Foam-PE, plasticization rate 100%.
• Suitable input wire dia.: 0.35~2.5mm;
• Suitable output wire dia.: Φ0.55〜3.5mm
• Temperature range : ± 1℃,concentricity 93%~97%
• Max wire speed: 400m/min(Detailed depends on the kind and specifiction of the wire)
• Centre height :1000
• Operating direction: Up to customer
• Color of machine: Up to customer
• Machine power : 50 kw
• Machine length : 22 m 

• PN630 Shaftless passive pay-off
• Tension device
• SJ-50×25 extruder host
• SJ-35×20 extruder host
• U7 free adjust crosshead Double layer / double color / single layer multifunctional head
• Outer diameter detector
• Automatic hopper+ dryer 
• stainless steel cooling water tank (1.5m+8m)
• Blow water machine
• 12m overhead line storage device
• 15kV high frequency spark tester
• 500mm double wheel capstan
• PN630 double reel take-up and traverse line machine
• Electrical control system of unit

4. Cable extrusion machine brand

• Motor: SIEMENS motor
• Frequency converter: YASKAWA
• Temperature controller: RKC high-precise temperature controller (Japanese brand )
• Electrical component:Japan,TAIWANG brand
• Bearing: NSK,KOYO,ASAHI (Japan brand )
• Touch screen : SIEMENS
• PLC : Siemens (German brand)