Feature：

Semi immersion + spray structure, easy to operate and maintain;

The host adopts frequency conversion motor and DC controller

Open drawing liquid tank, stainless steel cover.

1) Structural form: inline quick-change mode;

2) Cooling method: semi-immersion + spray type;

3) Driving mode: DC motor, DC controller;

4) Drum wheel diameter: Ф450mm;

5) Overall dimensions of the mold: Φ50 × 30mm;

6) Pull main motor: 160kW (frequency conversion)

7) Fixed speed wheel motor: 55kW (frequency conversion)

8) The door of the reel box is made of stainless steel.

9) Structural characteristics:

a) The wire drawing gear box is integrally welded (including the chassis), adopts gas shielded welding process, has small deformation, and is tempered and blasted to completely prevent the deformation of the box. It also solves the possibility of oil leakage due to improper processing, transportation and installation of the sub-assembly box, and improves the dimensional accuracy of the box;

b) Transmission gear material is 20CrMoTi, gear grinding after carburizing and quenching, level 5 accuracy, low running noise, and gear modulus is 7, which effectively improves fatigue strength;

c) Pneumatic gear shifting mechanism is designed. When the diameter of Φ1.7mm or more is pulled, the 10th and 13th high-speed gear drums will not be disengaged, reducing the wear on high-speed gears and reducing the operating noise;

d) The wire drawing drum rim is made of medium carbon steel, and the surface is sprayed with tungsten carbide, which can effectively improve the service life; the drum rim has a curved shoulder to protect the drum body from being damaged; , High centering accuracy and easy disassembly.

e) The main gear box of the cable is separated from the lubricant tank of the cable, and there is a partition in the middle so that oil and water mixing will not occur;

f) The drums are arranged in an inclined manner, and the steps are naturally formed between the drums, which can prevent the wires from being wound on the drums during the drawing process, causing the wires to squeeze and scratch;

g) Brushed drum rims are made of 40Cr forging and quenching and tempering, and the surface is sprayed with tungsten carbide. The hardness is 60HRC, which can effectively improve the service life.

h) The front of the wire drawing tank is a semi-open structure, which is convenient for operation and maintenance. The sealed door cover is made of stainless steel as a whole, and the electric screw is opened.

i) The fixed speed wheel speedometer is long, and the speedometer has high accuracy. Meter count error ≤0.3%.