36+36/500 Steel wire Armouring Machine Screening Machine

1. Application:

The machine is mainly used for single-layer armor of steel wire and copper wire shielding of less than 48 wire. It also has the function of winding metal wrapping and non-metal wrapping.

2. Main parameter of 36+36 steel wire armouring machine

• Max OD before armoring: Φ60mm
• Steel wire diameter: Φ0.8-4.0mm Steel,
• Rotation speed :23.83-53.01r/min
• Line speed: 3.981-30.073m/min
• Armoring pitch:75.1-1262mm
• Taping machine speed:450r/min
• Pay-off bobbin size in cage:  PN500
• Pay-off bobbin size out cage: PN2500
• Take-up bobbin size:PN2500
• Capstan wheel dia. :Φ2000mm
• Cage rotation motor power:55KW
• Machine center high:1000mm

  3. Main components of planetary steel wire armouring machine

• 2500mm portal  pay-off rack
• # type through wire frame
• 32+32/500 main cage
• Assembling die holder
• Φ400/ 2 taping head
• Meter counter 
• Φ2000mm dual wheel capstan
• 2500mm portal take-up and traverse line rack
• Mechanical transmission system
• Electrical control system
• Safety fence  

• High rigid, high speed and low inertia.
• 100% Back twist design insure that no abrasion damage while stranding.
• Most advanced emergency stop device.
• Various PLC electrics optional.
• Constant Bobbin back tension achieved by positive device & Single bobbin rotation is electronically sensed forcontrolling the required tension. In addition,magnetic tension control system is optional which is cheaper than thepneumatic mode.
• Planetary stranding machine is qualified for any wire/cable processing work.

5. Mechanical transmission system

• Main motor power:110KW
• Mechanical transmission system includes: main motor, main reduction gearbox, transmission shaft, coupling, etc.
•  Each gearbox adopts hard tooth surface grinding gear

6. Electric control system:

• Electrical power cabinet and control cabinet shall be set and installed separately. The electrical cabinet has good mechanical performance and dust-proof design, and is equipped with an appropriate amount of vents
• Power supply: three wire five phase system 380V (± 10%) 50Hz.
• Total installed power: 130kVA
• The unit is equipped with a corresponding number of emergency stop and jog buttons at each operation position for easy operation

7. Safety protection device:

• Main engine: Perforated plate wall safety net
• Coupling, transmission and other parts : Sheet metal protective cover 

8.Operating directon:

 Equipment operation direction: Right head machine, facing device operation,  left release line, right take-up line.