• Extruder Auxiliary Machine

    Production of cable auxiliary equipment, accessories for cable extrusion line

  • All kind of cable auxiliary machinery of cable extruder machine

    Meet various needs in cable production

    High speed printer for cable and wire
    High speed printer

    The machine is for printing of wire and cable products under onlinemovement

    • Motor drive rotating wheel will be printing ink pass on the printing wheel surface, through scraping ink after drive, in the cable scratch the surface of the scraping word
    • Application of line speed: 0~600 m / min;
    • Power: Single-phase 220V 50W;
    • Application of print wheel specifications: Outside diameter 100mm, inner bore Φ20mm, maximum width of 25mm;
    • Center height: 1000mm, up-down adjustment;
    • Oil ink cartridges: Cast aluminum, equipped with a random 2.
    • Printing quality conform to UL, CSA, VDE, JIS, T-MARR series of standards.
    Spark tester for cable and wire
    Spark tester

    Application: special-purpose test apparatus to detect fault of insulation on wire and cable.

    • Input voltage: AC 220V 50HZ
    • Adopt wire diameter range: Max 30mm
    • Output voltage: AC 0 - 15KV/0 - 25KV
    • Voltage indication error: <5%
    • Electrode length: 280mm/400mm
    • Max wiring speed: 400-600m/min
    • Max outer diameter of tested wire: 30mm/55mm
    • Detection current: 4-20MA
    • Capacity: 500VA
    • Fault indication: audible and visual alarm, counter.
    • Overall dimensions: 1050*500*880 mm
    Diameter Gauge for cable and wire
    Diameter Gauge

    Application: a laser diameter measurement is for the diameter of cable or wire.

    • Input voltage: AC 220-240V 50-60Hz
    • Measuring range: 0.2mm-20mm/0.2mm-25mm
    • Measurement accuracy: ± 0.002mm
    • Resolution: 0.001mm
    • Scanning speed: 600-1800 times/s
    • Operating temperature: 0-45℃
    • Inside PID regulation module.
    • Revolving operating panel.
    • RS485 communication interfaces, Modbus protocol.
    Standard drying loader for cable and wire
    Standard drying loader

    Application: Automatic Plastic Pellets Hopper and Dryer of cable or wire.

    • Uniform distribution of hot air, short heating time
    • High precision temperature control device
    • Separate barrier and base, easy to clear
    • Control: Difference Indicating Temperature Controller
    • All digital LED control P.I.D status display
    • 0-99 hours automatically boot time
    • Hopper capacity: 15-800kg
    • Blow power: 50-2000w
    • Heating capacity: 2.2-24kw
    • Drying temperature: max 125 ℃
    Talc powder applicator
    Talc powder applicator

    Application: The machine is a small-sized device which cooperates with extruder to produce wire, whose main function is to make copper wire or core wire dry and smooth after powdered.

    • Applicable wire diameter: ≤30mm;
    • Heating power: 1000W;
    • Temperature control meter: mechanical temperature control meter;
    • Powder storage: 10KG;
    • Heating gear reducer: 380V, 50HZ.
    • Control voltage: 220V, 50HZ.
    • Fully sealed structure, no powder leakage
    • Internal heating plate spiral stirring, electric heating type, one section temperature control.
    • 250mm * 250mm aluminum alloy double wheel rotation.
    Copper Wire Pre-Heater
    Copper Wire Pre-Heater

    Application: preheating for the conductor before extrusion to enhance the adhesion between the conductor and the insulation layer

    • Preheating temperature: ≤120°C
    • Line speed: 500m/min max.
    • Output power: 15KW max.
    • Applicable wire OD: Single copper wire: Φ0.6-Φ1.8mm,Stranded wire: Φ0.6-Φ3mm
    • Power system: 220V/50HZ
    • Heating mode: mutual induction heating, manual heating, automatic tracking heating
    Plastic Pellets Mixing Machine
    50-500kg Plastic Pellets Mixing Machine

    Application: The machine is Use for PP PVC Pet ABS Plastic Pellets Mixer

    • The four wheel vertical design
    • With cycloid reducer motor, low noise
    • Mixing time set 0 - 30 minutes.
    • Capacity:50~500Kg
    • Motor Power:1.5~5.5KW
    • Heating Power:15~30 KW
    • Speed:15~90 r/min
    • Rotating leaf material:304 Stainless Steel
    • Overload and overheating protect
    Gravimetric mixer Machine
    Gravimetric mixer Machine

    Application: It is mostly applied in plastic injection, extrusion, or material mixing with exact proportion to mold plastic.

    Precision weighing mixer, color masterbatch mixer

    • Hopper qty: 2-3
    • Mixing capacity:#70 extruder 200kg/h, #90 extruder 300kg/h
    • Mixing range of main materials:5-100%
    • Additive mixing range:0.5-10%
    • Main hopper volume, additive hopper volume:32L
    • Mixing drum volume:20L
    • Power specifications:230V/50
    • Total power:0.25KW
    • compressed air:6-8Kgf/cm2
    Wire accumulator for high speed extruder
    Wire accumulator for high speed extruder

    Application: Speed up automatically when accumulated wire for cable extrusion line machine

    • Track material: Cold drawn square steel, quenched and tempered hard chrome, double track upper and lower
    • Storage capacity: approximately 210M
    • Track length: approximately 12M
    • Storage wheel: 10/11 wheel set, Dia. 300mm, V-shaped groove, aluminum alloy material, wheel surface anodized hardening treatment
    • Drive: 2HP × 4P AC motor+reducer+20Kg-M magnetic powder tension controller
    Flyer cone type pay-off from ningbo capstian technology

    Flyer cone type pay-off

    Application: Flyer type pay-off, cone type, suitable for small section cables and low voltages

    • Bobbin size: PND400-PND500, PND500-PND630, PND630-PN800
    • Conductor diameter:0.2-3.6mm
    • Finished wire diameter: 1.0-6.0mm
    • Pay-off speed: upto 120m/min
    • Reel Lifting:Motorized or Manual
    • Carriage Moving:Motorized or Manual
    Ultra high speed cable ink printing machine

    Ultra high speed cable ink printing machine

    Application: For printing the label and word on the surface of insulation wire.

    • The printing head has a 360-degree fully enclosed shield to prevent ink from splashing out. The closed guard can be adjusted according to the diameter and width of the printing wheel.
    • High-speed printer specifications: Applicable wire diameter: Φ0.8-25mm.
    • Printing speed: below 1200 m/min.
    • The height of the printing center is 1 meter (can be fine-adjusted). There is no need to move the printer when printing is not in use. The fixed butterfly gong on the right side of the middle part of the printer can be loosened and locked directly by moving back 80mm.
    • Suitable for the outer diameter of the printing wheel: Ф86mm Ф100mm (the squeegee seats for the outer diameter of the printing wheel 100 and 86 are different, so you need to indicate the options when placing an order).
    • Wheel width: 8-20mm.
    • Printing wheel aperture: 20mm or 30mm (optional).
    • Weight: 59 kg.
    • Voltage: 220V, single phase.
    • Mechanical dimensions: length 310X width 410X height 1100mm

     

    Plastic crush - granulating mill equipments
    Plastic crush - granulating mill equipments

    A scrap wire crushing machine is suitable for breaking waste electric wires, all kinds of copper wires, and other materials.

    • Crushing chamber:500*290
    • Voltage: 380V, 50HZ
    • Crushing ability:150-200kg, Depending on the raw materials
    • Blade material: 9CRIS/SKD-11
    • Stationary cutter:2
    • Electrical appliances: Chint
    • Motor: Jintai/Yaoda
    • Sieve: 10-12mm
    • Bearing model: UCFC212*2
    • Rotary cutter:15
    • Power: 11kw
    • Size L900*W1000*H1650mm
    • Weight:800kg
  • Auxiliary machines for Cable extruder

    Auxiliary equipments for cable extrusion line

    NC SINGLE/ DOUBLE VERTICAL TAPING MACHINE

    NC SINGLE/ DOUBLE VERTICAL TAPING MACHINE

    NC SINGLE/ DOUBLE HORIZONTAL TAPING MACHINE

    NC SINGLE/ DOUBLE HORIZONTAL TAPING MACHINE

    MICRO-COMPUTER COILING MACHINE

    MICRO-COMPUTER COILING MACHINE

    AUTOMATIC PLC COILING AND WRAPPING MACHINE

    AUTOMATIC PLC COILING AND WRAPPING MACHINE

    HIGH SPEED SEMI AUTOMATIC COILING MACHINE

    HIGH SPEED SEMI AUTOMATIC COILING MACHINE

    Medium Cross-section Semi Automatic Coiling Machine

    Medium Cross-section Semi Automatic Coiling Machine

    Big Cross-section Semi Automatic Coiling Machine

    Big Cross-section Semi Automatic Coiling Machine

    MICRO COMPUTER PRECISION CUTTING MACHINE

    MICRO COMPUTER PRECISION CUTTING MACHINE

    MICRO COMPUTER PRECISION CUTTING MACHINE

    Vertical Colour Extruder Hoist

    MICRO COMPUTER PRECISION CUTTING MACHINE

    Horizontal Colour Extruder Hoist

    Horizontal Double Frame Take-up Machine

    Horizontal Double Frame Take-up Machine

    Vertical Coiling Machine

    Vertical Coiling Machine

    Gate Type Take-up & Pay Off Machine

    Gate Type Take-up & Pay Off Machine

    Spark Tester

    Spark Tester

    Conductor Pre-heater

    Conductor Pre-heater

    Dual spool clutch driven pay-off

    Dual spool clutch driven pay-off

    Flyer type pay-off

    Flyer type pay-off

    Vertical pay-off stand

    Vertical pay-off stand

    Shaftless active pay-off stand

    Shaftless active pay-off stand

    Shaftless active pay-off stand

    Shaftless powder clutch pay-off stand

    Magnetic flyer pay-off

    Magnetic flyer pay-off

    Horizontal Pay-off unit

    Horizontal Pay-off unit

    Shaftless pay off

    Shaftless pay off

    Longmen type active pay-off

    Longmen type active pay-off

    coiling machine 1000 to 710

    1000-710 Coiling Machine

    U7 Crosshead of Extruder

    U7 Crosshead of Extruder

ExportBureau profile