STRANDING MACHINE
EXTRUDING MACHINE
AUXILIARY MACHINE
Tubular Strander 630(1+6) Line For Stranding (Al. Cu. St) Cables.
STRANDING UNIT (1+ 6) / 630 mm with all accessories positioned on metal beams equipped with the following:
• Safe and easy loading System for bobbins with diameter 630mm
• Suitable for strand Steel wires
• Suitable for strand (Cu, Al) wires and insulated conductors.
• suitable Mechanism for fixing bobbin equipped with controller for adjusting wire tension proper for all diameters.
• Safety Mechanism prevent the exit Of the reel of its station and wire break detector stop the machine..
• The machine is equipped with warning detectors for existence of vibration which stops the machine.
• Equipped with a sensor that prevents commissioning of machine when there are people inside it
• Equipped with suitable cabinet for sound-proof guard with the safety locking for stranding stage.
• quick adjustment closing die unit for stage (1+6) equipped with suitable dies for forming circular section.
• The possibility of recycle the machine in both directions for each stranding unit.
• Equipped with a self-lubricated and greasing system
E. Greasing unit Suitable for greasing the central cable with greasing materials positioned between the stranding unit (6)
F. Closing Die Unit and rotating compacting unit :
To be adjusted easily, suitable for sector shaping by angularly adjustable rollers , easily disassemble and exchanging and provided with shaping sets for the circular sections and sector.
G. pulleys Guide for returning of stranding stabilization susceptive for adjustment due to the section.
H. Haul-off unit double capstan unit
suitable for producing cables and controlling the line speed and synchronized with stranding machine.
I. meter counter
J. Guide for stranding cable
K. Portal TAKE –UP : with self-traversing system for bobbin diameter( 1200-2000) mm , and equipped with lifting /lowering system ,fixing the bobbin and driving system.
L. Electrical welding machine : suitable for welding (Al, CU,ST) from diameter (1 till 4)mm
M. Air Compressor unit screw type with dryer suitable for the machine.
N. Electric Equipments: includes the Electric Cabinet with air condition device, protection degrees, main switches, auxiliary transformers, safety actuators, Operation panel with touch screen for controlling, setting and displaying all the functions. PLC for Synchronizing all components of the machine.
All electrical equipment shall be comply with EN 60204 LEC .
O. All Electric Equipments and the PLC system and the driving units of (Siemens).