STRANDING MACHINE
EXTRUDING MACHINE
AUXILIARY MACHINE
PND630/6+12+18+30 High Speed Separate Motor Drive With Prespiralling &Compacting Head.
Wire characteristcs
1.Material copper ,aluminium
2.Shape:round
1.6-4.5mm for copper
1.6-5mm for aluminium (EC grade)
1.6-4.5 for aluminium alloy(350N/mm² max)
3.Composition of the conductor.
1+6+12=19 wires .
1+6+12+18=37 wires.
4.Main characteristics
4.1Diameterof cores:45mm max
4.2Stranding lay range 60-600mm
4.3Prespiralling lay range 300-2000mm
4.4Rotation speed of each cage
Copper aluminum
6 bobbin 195rpm 240rpm
12 bobbin 170rpm 205rpm
18 bobbin 150rpm 180rpm
5.Geared line speed
Up to 50m/mn
Actual line speed and actual rotation speeds (production speed)
Depend on cable type ,cable lay length, taping lay length,etc
6.Dual wheel pulling capstan 2500mm motorized(QL2500-10T)
Deviating pulley with cable clamping
Meter counter,
Portal self-traversing take up DIN2500.mobile on floor
Electrical cabinet 37 wires,electrical shaft,(electrical cabinet 37W.elec shaft)
7.Commissioning
Stationary pay off, braked,DIN630,
Rigid carriage for 6 bobbins 630 mm DIN, independent motors version
Performing head for 6 wires
Motorized loader for side loading for rigid carriage 2 bobbins 630mm
Cabling die holder
Rigid carriage for 12 bobbins 630 mm DIN, independent motors version
8.Performing head for12 wires .
Motorized loader for side loading for rigid carriage 4 bobbins 630mm
Prespiralling &compacting head , with independent motor , for 2 pairs of rollers 120mm,
9.Rigid carriage for 18 bobbins 630 mm DIN, independent motors version
10.Performing head for18 wires .
Motorized loader for side loading for rigid carriage 6 bobbins 630mm
Prespiralling &compacting head , with independent motor , for 2 pairs of rollers 120mm.