1250/3B PLC Bow Type Stranding Machine Bow Twister Line
Certification:ISO,CE
Model Number:GJJ-1250/3
Payment Terms: T/T, L/C
Delivery Time: 90 working days
Applicable scope of wire rod : AL / Cu 10mm2— 120mm2
Max stranded diameter: 60mm
Warranty: 12 months
1250/3B PLC Bow Type Stranding Machine Bow Twister Line
1. Application:
This machine is suitable for stranding 2-6 cores ABC overhead cable, control cable or power cable from 10-120sqmm. Instead of the low speed cradle laying-up machine and small cross-section cabling machine.
2. Main parameter of bow type cabling machine
- Single wire diameter：Ф20mm
- Max strand diameter：Ф60mm
- Cage max rotation speed：160r/min
- Taping speed：650r/min (stepless adjustable)
- Capstan line speed range：32.13-244.12m/min
- Max traction force：1250kg
- Take-up bobbin size：PN1600-2500
- Pay-off bobbin size：PN1250
- Main motor power：37KW(AC motor)
- Taping motor power：7.5kw(AC motor)
- Capstan motor power：18.5kw(AC motor)
- Take-up motor power：5.5kw(AC motor)
3. Machine main electric brand:
- Motor: Siemens Motor
- Transducer: American Emerson transducer
- Temperature controller: Omron Brand PID Smart type
- Man-Machine interface: 10.2 inch color
- PLC and Control Module: Siemens
- Screw and Barrel: Produced by jinhu Company.
- Bearing: Japan NSK or other same quality brand
- Low voltage electrical parts: Adopts SIEMENS, OMRON, SCHNEIDER brand.
4. Electric control system:
Electrical power cabinet and control cabinet shall be set and installed separately. The electrical cabinet has good mechanical performance and dust-proof design, and is equipped with an appropriate amount of vents
Power supply: three wire five phase system 380V (± 10%) 50Hz.
Total installed power: 75KW
The unit is equipped with a corresponding number of emergency stop and jog buttons at each operation position for easy operation
5. Safety protection device:
Main engine: full close and automatic open and close safety net
Coupling, transmission and other parts : Sheet metal protective cover
6. Operating directon:
Equipment operation direction: Right head machine, facing device operation, left release line, right take-up line.
